AirFi
GPS tracking· 5 min read · AirFi Team

Geofencing for Bus Fleets: Depot, Stop and Zone Alerts with GPS Tracking

What geofencing is, how GPS trackers use it on buses, which geofences to set up first, and how to avoid alert fatigue for your control room.

Short answer: a geofence is a boundary drawn on a map around a place, such as a depot, a school or a stop. The GPS tracker reports the bus’s position, and the fleet platform raises an alert or records an event whenever the bus enters or leaves that boundary.

How does geofencing work?

  1. You draw a circle or a shape around a place on the fleet dashboard.
  2. The tracker on the bus reports its GPS position at regular intervals.
  3. The platform checks each position against the geofences assigned to that bus.
  4. When the bus crosses a boundary, it records entry or exit with the time, and alerts the people you choose.

Which geofences should a bus operator set up first?

Entry, exit and dwell alerts

How big should a geofence be?

Large enough to cover the whole area the bus uses, plus a margin for GPS error, which can be several metres and worse among tall buildings. Too small, and the bus seems to enter and leave repeatedly while parked. Too large, and arrival is recorded before the bus is really there. Start generous for depots and tighter for stops, then adjust from what the reports show.

How to avoid alert fatigue

Geofencing and route deviation

A geofence watches a place. Route deviation watches the path between places, alerting when a bus leaves its planned route. Most operators use both. Read how route deviation alerts work.

AirFi’s GPS vehicle tracking includes live tracking, route playback, geofence and overspeed alerts on one dashboard, with an AIS-140 certified tracker for public service vehicles. Talk to our team.

Frequently asked questions

What is a geofence in GPS tracking?

A geofence is a virtual boundary drawn around a place on a map. When a tracked vehicle enters or leaves it, the fleet platform records the event and can send an alert.

What geofences are useful for buses?

Depots, terminals, major stops, schools, client sites, fuel stations and workshops, plus no-go zones where the bus should not be.

Why does a parked bus show repeated geofence alerts?

Usually the geofence is too small for normal GPS error, so the reported position drifts across the boundary. Make the zone larger or add a short time delay before alerting.

Related solutions

Planning a smarter, safer fleet?

Talk to AirFi →