AirFi
Passenger experience· 5 min read · AirFi Team

Route Information Displays for Buses: Destination Boards and Next-Stop Screens

The route information displays a bus needs, from front LED destination boards to in-cabin next-stop screens, and how to make them readable and automatic.

Short answer: route information displays tell people which bus this is and where it goes. Outside the bus, LED boards at the front, side and rear show the route number and destination to people at the stop. Inside, a next-stop screen shows passengers where the bus is on its route, ideally changed automatically by GPS rather than by the driver.

Which displays does a bus need?

LED or LCD?

What makes a display readable?

Manual or automatic?

On many buses the driver changes the destination with a keypad at the end of each trip, and often forgets. Linking the displays to the onboard unit and GPS lets them change automatically: the destination flips at the terminus, and the cabin screen moves to the next stop as the bus approaches it. Route changes can then be sent to the bus instead of being programmed by hand.

Displays and announcements together

Inside the bus, the next-stop screen works best in sync with a voice announcement, so passengers who cannot see the screen hear the stop and those who cannot hear read it. This combination is a passenger information system (PIS). See also how GPS-triggered announcements work.

What should an operator specify?

  1. Front, side and rear boards sized for your bus body and stop layouts.
  2. Sunlight-readable LEDs with automatic brightness.
  3. Support for the scripts your routes need.
  4. GPS-driven automatic updates, with a manual override for the driver.
  5. Remote route and message updates.
  6. An in-cabin screen synced with announcements.
  7. Rated for vehicle power, vibration and heat.

AirFi supplies LED destination boards and route displays, and its GPS passenger announcement system drives automatic next-stop announcements and an in-cabin passenger information screen. Talk to our team about passenger information for your routes.

Frequently asked questions

What is a bus route information display?

A display that shows the bus’s route number, destination and stops: LED destination boards on the outside of the bus, and a next-stop screen inside for passengers on board.

Can the destination board change automatically?

Yes, when it is linked to an onboard unit with GPS. The destination can change at the terminus and the cabin screen can move to the next stop without the driver pressing anything.

Which is better for a bus destination board, LED or LCD?

LED matrix boards are usual outside the bus because they are bright enough to read in daylight from a distance. LCD screens suit the cabin, where they can show stop lists and maps.

Related solutions

Planning a smarter, safer fleet?

Talk to AirFi →